How to Drain an Inground Pool Without a Pump

[N.047305727]

Draining an inground pool without a pump can be done using a garden hose through the siphoning method. First, submerge the entire hose in the pool to fill it with water. Then, cover one end with your hand and quickly remove it from the pool, placing it at a lower elevation than the pool's water level. Gravity will cause the water to flow out. Ensure the drainage area is safe and won’t cause flooding. Monitor the process regularly, as it can take several hours or more depending on the pool's size.

Materials Needed:

• Garden hose (or multiple hoses, depending on pool size)
• Access to a lower drainage area

Step-by-Step Guide:

1. Position the Hose: Submerge one end of the garden hose completely in the pool to fill it with water. Ensure no air pockets remain inside the hose.
2. Create the Siphon: Once the hose is filled, quickly place the other end of the hose in a lower drainage area, such as a gutter or downhill slope. Gravity will naturally draw the water out of the pool.
3. Monitor the Flow: Keep an eye on the siphoning process to ensure continuous water flow. Adjust the hose if the flow slows or stops.
4. Repeat if Necessary: For larger pools, multiple hoses can be used to speed up the draining process.

Safety Tips:

• Avoid draining the pool onto neighboring properties to prevent water damage.
• Check local regulations for proper water disposal.
• Never drain a pool completely if the groundwater level is high, as this can cause structural damage.

Using this siphoning method allows you to effectively drain your inground pool without the need for a pump.

[N.047302546]

To drain an inground pool without a pump, use a siphon hose by submerging it fully, then placing one end in the pool and the other downhill to start water flow. For maintenance tips or exploring alternatives like Above Ground Pools, check reliable pool care resources like au pool for guidance.